Published agency index · Reviewed
Inside New York’s public well records
Registered driller completion reports have been collected since April 2000; mapped locations are generally parcel-scale and may not be the exact wellhead location.
These are retrieved public records, shown so you can see the identifiers, available values and gaps before running your own lookup. They are regional examples, not a statewide sample or a prediction for a property.
| Public record ID | Published locality | Published use / type | Status / location quality | Recorded depth | Reported rate |
|---|---|---|---|---|---|
| A002131 | ALBANY | Irrigation | Status not reportedLocation quality not reported | 500 ft | Not reported |
| A002132 | ALBANY | Irrigation | Status not reportedLocation quality not reported | 500 ft | Not reported |
| A002129 | ALBANY | Irrigation | Status not reportedLocation quality not reported | 500 ft | Not reported |
Depths are converted from the lookup’s normalized meters to feet. Reported rate can represent yield, a pump-test rate or pump capacity depending on the source; these values are historical and are not interchangeable. A source zero can be a placeholder or a reported result: verify its meaning in the original file. “Not reported” means no comparable value was retained, not zero and not proof that the original file lacks all information.
No comparable reported rate is available in these examples; a supply estimate cannot be calculated from them.
How to verify a New York record
Use the DEC well number and linked report where available. Reported pump capacity describes equipment or a filed value; it is not interchangeable with a sustained yield test.
Open New York State Water Wells ↗ and search for the identifiers above. Compare the original filing, location method and well type with seller documents and a physical well identifier.
Review method: up to three distinct public identifiers selected in returned distance order from an existing regional lookup, without selecting for an attractive depth or yield. Re-run the example lookup ↗ · How these reviews are prepared
New York State Water Wells
New York State Department of Environmental Conservation
Registered driller completion reports have been collected since April 2000; mapped locations are generally parcel-scale and may not be the exact wellhead location.
What you can find in New York well records
Available fields vary by individual filing, but the New York integration can surface:
- well number
- well type
- well depth
- reported pump capacity
- county
- original report link
How to search the New York well map and read a well log
- Enter the full property address above to locate the property and open nearby mapped records.
- Compare record identifiers, well type, completion date and distance before deciding which wells are relevant.
- Open the public source below to trace an original well log or completion report where the agency publishes one. A mapped summary may omit details from that document.
- Verify the actual property well with the seller, record identifiers and an on-site inspection; nearby records alone cannot identify it.
How to use the record before buying a property
The original report link plus mapped depth and pump-capacity fields provide a useful first pass for property due diligence without hiding the NYSDEC source.
Start with the address search, compare the closest records and their distances, then open the public source before treating a record as the subject property's well. If water quality or current performance matters, use current testing and an on-site well inspection.
New York coverage limitation
New York has collected registered-driller completion reports since April 2000. Mapped locations are generally parcel-scale and may not represent the exact wellhead location.
Public New York source
WellLookup is independent of New York State Department of Environmental Conservation. The underlying public source is New York State Water Wells. WellLookup adds address search, nearby-record comparison and property-focused reporting; it preserves the published source values.
Frequently asked questions
Yes. Enter a street address and WellLookup will search nearby mapped records from the supported New York source.
Not necessarily. Location precision varies, so verify identifiers, documents and the physical well before relying on the match.
The $29.99 USD property report organizes the available evidence, nearby comparisons, source limitations and follow-up questions into one PDF.
Related well research
Understand how mapped well records should be interpreted around a property.
Compare nearby recorded depths without treating neighboring wells as a prediction.
Connect records with inspection, testing and purchase due diligence.