Published agency index · Reviewed
Inside Missouri’s public well records
Statewide certified well records published as a 2022 MSDIS snapshot. Older and pre-certification wells can be incomplete, and this snapshot is not presented as a live daily registry.
These are retrieved public records, shown so you can see the identifiers, available values and gaps before running your own lookup. They are regional examples, not a statewide sample or a prediction for a property.
| Public record ID | Published locality | Published use / type | Status / location quality | Recorded depth | Reported rate |
|---|---|---|---|---|---|
| 97908 | Not reported | Monitoring | ActiveLocation quality not reported | 24.2 ft | 0 in source (verify meaning) |
| 208893 | Not reported | Monitoring | ActiveLocation quality not reported | 40 ft | 0 in source (verify meaning) |
| 140665 | Not reported | Monitoring | ActiveLocation quality not reported | 39.5 ft | 0 in source (verify meaning) |
Depths are converted from the lookup’s normalized meters to feet. Reported rate can represent yield, a pump-test rate or pump capacity depending on the source; these values are historical and are not interchangeable. A source zero can be a placeholder or a reported result: verify its meaning in the original file. “Not reported” means no comparable value was retained, not zero and not proof that the original file lacks all information.
How to verify a Missouri record
Use the well ID and reference/certification numbers to trace the filing. Well type, status, casing and reported lithology help establish what the record describes before comparing its depth with another well.
Open Missouri DNR Water Wells — MSDIS 2022 Snapshot ↗ and search for the identifiers above. Compare the original filing, location method and well type with seller documents and a physical well identifier.
Review method: up to three distinct public identifiers selected in returned distance order from an existing regional lookup, without selecting for an attractive depth or yield. Re-run the example lookup ↗ · How these reviews are prepared
Missouri DNR Water Wells — MSDIS 2022 Snapshot
Missouri Department of Natural Resources / Missouri Spatial Data Information Service
Statewide certified well records published as a 2022 MSDIS snapshot. Older and pre-certification wells can be incomplete, and this snapshot is not presented as a live daily registry.
What you can find in Missouri well records
Available fields vary by individual filing, but the Missouri integration can surface:
- well ID
- reference number
- well type and status
- completion date
- total depth
- static water level
- reported yield
- casing
- liner
- contractor permit
- formation intervals
How to search the Missouri well map and read a well log
- Enter the full property address above to locate the property and open nearby mapped records.
- Compare record identifiers, well type, completion date and distance before deciding which wells are relevant.
- Open the public source below to trace an original well log or completion report where the agency publishes one. A mapped summary may omit details from that document.
- Verify the actual property well with the seller, record identifiers and an on-site inspection; nearby records alone cannot identify it.
How to use the record before buying a property
Missouri's official records combine depth, water-level, yield and formation fields that are valuable for local comparisons when the state's location warning is kept visible.
Start with the address search, compare the closest records and their distances, then open the public source before treating a record as the subject property's well. If water quality or current performance matters, use current testing and an on-site well inspection.
Missouri coverage limitation
Missouri DNR warns that well locations depend on how accurately drillers reported them. Some wells are mapped only to a PLSS section center, so multiple records can share the same approximate point and map proximity can be misleading.
Public Missouri source
WellLookup is independent of Missouri Department of Natural Resources / Missouri Spatial Data Information Service. The underlying public source is Missouri DNR Water Wells — MSDIS 2022 Snapshot. WellLookup adds address search, nearby-record comparison and property-focused reporting; it preserves the published source values.
Frequently asked questions
Yes. Enter a street address and WellLookup will search nearby mapped records from the supported Missouri source.
Not necessarily. Location precision varies, so verify identifiers, documents and the physical well before relying on the match.
The $29.99 USD property report organizes the available evidence, nearby comparisons, source limitations and follow-up questions into one PDF.
Related well research
Understand how mapped well records should be interpreted around a property.
Compare nearby recorded depths without treating neighboring wells as a prediction.
Connect records with inspection, testing and purchase due diligence.